How to fix Power Windows

Image : http://www.flickr.com

Power windows are often problematic. The problem is usually electrically rather than mechanically. Securing windows is electrically simply a process of elimination.

Sometimes a problem with the control panel enter the door. If the master control does not work, but the doors that operate from their respective groups, the problem lies in the main window. If a window does not control the functions of individual work, but with control, it is likely that thecontrol switch that has a unique problem. You will also need the cable that passes through the door and you are sure that breaks the isolation, wear or breakage.

If the problem with the private car window, the door is reduced, then ask you to remove the inside door. It will consist of bolts or screws holding the arm and push-pins that hold the plastic sheet will remain. The error can be removed by carefully pullingPanel design, also along the perimeter to the pins from their sockets. Most boards vehicle must be moved to be able to remove the door. Remove the side cover to access the window of the door when the engine is. Sometimes a problem because the ground. And 'sufficient to restore the connection to land is often the repair function of the window. If you do not solve the problem by restoring the link with the land, so it may be necessarycompletely replace the window motor. After the repair, replacement of the door panel and check all windows and desk.

to stop work if all the power windows at the same time, the problem is likely that the fuse or circuit breaker. Look in the owner's manual for the location of your backup windows and check the fuse.