Image : http://www.flickr.com
Most people can have their car battery. The hardest part is to change your dough by lifting it from the vehicle after disconnecting the battery terminals, mainly because it weighs so much. With these simple steps can make the battery, no matter where you are.
Sun needs to change the battery charger cleaning solution, anti-corrosion solution, a plug and a lock, a key combination, a wire brush, a newBattery and a screwdriver.
1) Turn off the engine down, you lift the hood and check the battery. Remove the negative (black) battery cable first, a nut with a spanner. Twist and pull the battery cable from the battery with an upward movement or lever with a tool or a screwdriver if it sticks.
2) Repeat the same method with the positive (red) cable.
3) Use a socket and ratchet or a wrench to remove the battery terminal, if youexist.
4) Remove the battery compartment. Remember, batteries are heavy, so be on the floor with both hands. Put it on the ground to ensure your safety and your vehicle.
5) Use a wire brush and water to remove any corrosion from the clamp and the battery tray. Clean the battery cable connectors with a wire brush as well, but without water or other liquids. If the connections have a strong corrosion, you can create a specialClean the battery, which is available in most auto parts stores.
6) Insert a new battery into the battery holder and fasten with the nut. Re-attach and tighten the positive (red) battery, then the negative. You can choose to spray the terminal ends with an optional anti-corrosion solution, which is more collections to prevent corrosion. Verify that the connection is tight, because if the lines move, the vehicle can not be started.
Most car batteriesat least for a period of 60 months. If it fails this time, you can replace it for free.
No comments:
Post a Comment